Welding Setup Assistant
Randall Yard Works | Preliminary welding settings and setup guidance
1. Welding Equipment
Welding process
MIG (GMAW)
Flux Core (FCAW)
Stick (SMAW)
TIG (GTAW)
Welder / machine
Available input power
120V
240V
Both 120V and 240V
Unknown
2. Material
Base material
Mild steel
Stainless steel
Aluminum
Cast iron
Other / unknown
Material thickness
1/16 inch (0.063")
3/32 inch (0.090")
1/8 inch (0.125")
3/16 inch (0.188")
1/4 inch (0.250")
3/8 inch (0.375")
1/2 inch (0.500")
3/4 inch (0.750")
Material condition
Clean bare metal
Light surface rust
Painted or coated
Oily or contaminated
3. Joint and Position
Joint type
Butt joint
Fillet / T-joint
Lap joint
Corner joint
Welding position
Flat
Horizontal
Vertical up
Vertical down
Overhead
Joint gap
No gap / tight fit
Small gap
Moderate gap
Large gap
4. Consumables
Wire / electrode diameter
0.023 inch
0.030 inch
0.035 inch
0.045 inch
Unknown / not applicable
Shielding gas
75% Argon / 25% CO2
100% CO2
100% Argon
Other gas mixture
No shielding gas / self-shielded
Not applicable
Generate Welding Recommendations
Recommended Setup
Technique and preparation